Arris VIP2500 Betriebsanweisung PDF herunterladen (Seite 21)

Touchstone TM402 Telephony Modem User’s Guide 22

Getting Battery USB Ethernet

Safety Started Installation Installation Drivers Configuration Usage Troubleshooting Glossary

Connecting the Telephony Modem

WARNING: Connecting the Telephony Modem to the home's existing tele-

phone wiring should only be performed by a professional installer. Physical con-

nections to the previous telephone provider must be removed and the wiring

must be checked; there must not be any voltages. Cancellation of telephone ser-

vice is not adequate. Failure to do so may result in loss of service and/or perma-

nent damage to the EMTA.

1 Connect one end of the coaxial cable to the cable outlet or splitter, and the

other end to the Telephony Modem’s Cable connector (G). Tighten the con-

nections by hand.

2 Connect one end of the telephone cable to the telephone port on the back

of the Telephony Modem (A or B). Connect the other end to the telephone.

Note: If you have a TM402G, TM402H, or TM402P Telephony Modem and a

phone with two separate lines on a single RJ-11 cord, it must be plugged

into the port labeled “Tel 1/2”.

3 Insert the plug from the AC adapter or the power cord into the Power con-

nector on the Telephony Modem (F).

4 Insert the power cord into a convenient AC outlet.

The Power light on the front of the Telephony Modem should light up, then

start flashing. See Troubleshooting

if the Power light does not turn on.

5 After connecting the coax cable and power, proceed as needed:

• Making Ethernet Connections

• Making USB Connections

Note: Do not connect the same computer to both the Ethernet and USB

ports.

Making Ethernet Connections

6 Connect one end of the Ethernet cable to the port on the back of the Tele-

phony Modem labeled “Ethernet 10/100,” (D) and the other end to the

Ethernet port on a computer, hub, or broadband router.

Note: If you are connecting to a computer, use the Ethernet cable included

in the Telephony Modem package.

ear

ane

TM402G, TM402H, and TM402P Models

TM402A and TM402B Models

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 60 61

Keine Kommentare

Arris VIP2500 Betriebsanweisung Seite 21