Arris Touchstone DG1670 Betriebsanweisung PDF herunterladen (Seite 21)

Connecting the Data Gateway

1 Connect one end of the coax cable to the cable outlet or splitter, and the

other end to the Data Gateway’s Cable connector (D). Tighten the con nec-

tions by hand, then tighten an additional 1/8 turn with a wrench.

Note: For best performance, use high-quality coax cable and minimize or

eliminate splitters between the cable jack and the Data Gateway. If you are

using MoCA for your home network, MoCA ﬁlters must be installed on any

legacy client devices. Your cable company will install these ﬁlters for you.

2 Insert the plug from the power cord into the Power connector on the back

of the Data Gateway (E) and insert the power cord into a convenient AC

outlet.

The Power light on the front of the Data Gateway lights up, then ﬂashes

once (refer to the LED tables shown in Using the Data Gateway). See Trou-

bleshooting if the Power light does not turn on.

3 Connect one end of the Ethernet cable to any Ethernet port on the back of

the Data Gateway, (C) and the other end to the Ethernet port on a com-

puter, hub, or broadband router.

Note: If you are connecting to a computer, use the Ethernet cable included

in the Data Gateway package.

Touchstone DG1670 Data Gateway User’s Guide

Safety

Getting

Started Installation

Ethernet

Conﬁguration Usage Troubleshooting Glossary

Cable

eset

USB

Ethernet

10/100/1000

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Keine Kommentare

Arris Touchstone DG1670 Betriebsanweisung Seite 21